DJI recently released the Zenmuse P1 full-frame photogrammetry payload designed to work with the Matrice 300 RTK. The P1 allows for accurate data without a GPS connection, a 45 MP full-frame sensor, DJI’s TimeSync 2.0, a mechanical shutter, and more.
The P1 is DJI’s latest camera payload designed for use in the aerial surveying market. It has an accuracy of 3 cm horizontally / 5 cm vertically without a GPS connection. It can also cover 3 squared-km in a single flight using DJI’s TimeSync 2.0 technology, which syncs images with the flight data.
The P1 is, of course, stabilised and comes with a global mechanical shutter with a shutter speed of 1/2000. The 45 MP full-frame sensor means high-resolution images can be captured during the day and low-light conditions, allowing for more data to be collected in a signal day.
The payload can take pictures every 0.7 seconds during flight and is compatible with DJI’s range of DL mount lenses, so you get the data you need the way you want it. Using the P1 with the Matrice 300 RTK in Smart Oblique Capture mode allows you to cover 7.5 km in a single day. The camera automatically takes images from multiple angles during the flight, removing the need for multiple passes.
Once the flight is complete, the data is automatically sorted by the mission name and time in individual folders. The image metadata is also stored, with the GPS information (when connected), gimbal status, and anything else that might be important later on.
While you are still in the field, a Fieldwork Report can be generated to verify the data’s quality and ensure nothing has been missed during the mission. You are also able to look back on the images that were captured.
DJI recommends the Zenmuse P1 for topographic mapping, cadastral surveying, natural resource management, geological investigation, and disaster site modeling. If you are interested in learning more about the DJI Zenmuse P1 or the DJI Matrice 300 RTK, please contact our friendly sales team.