Typical flying height
100m AGL
System precision
2.5cm
System accuracy
3cm
Battery weight excl.
1.1kg
Great quality data in any scenarios
Ideally suited for projects requiring higher flight speed. Flight operation speed from 5 to 20m/s with a flying height of up to 100m.
Mount it anywhere
The Mapper+ can be mounted on a wide range of UAV platforms due to its low weight.
- DJI Matrice 300 & 350
- Acecore Zoe & Noa
- Freefly Alta X
Be more productive in the field
Choose your power source, with DJI SkyPort or Gremsy gPort, use the built-in battery, or an external power connectior.
Everything you need in one backpack
Carry your LiDAR along with everything else you might need. This backpack is the size of carry-on luggage and fits in any airline overhead compartment.
Data generation in a few clicks
Handle your pointclouds with our own, all-in-one software solution. Extract, process, and display data immediately after flight acquisition.
Advanced calibration
All our systems are calibrated before shipment and come with a calibration certificate. Be ready to fly your system as soon as you receive it!
On-site training
YellowScan delivers complete training to new customers. The training is provided over 2 days and can take place at your premises or online.
Technical support
Our 1 year unlimited technical support from our experts enables you to confidently undertake your projects, whether you are new or experienced in the field.
Specifications
Specifications
| Precision (1) | 2.5cm |
| Accuracy (2) | 3.0cm |
| Echoes per shot | Up to 3 |
| Laser wavelength | 905nm |
| GNSS-Inertial solution | Applanix APX-15UAV |
| Scanner field of view | 70.4° |
| Shots per second | Up to 240k |
| Weight batt. incl. | 1.3kg (2.9lbs) |
| Weight batt. excl. | 1.1kg (2.5lbs) |
| Size | L15cm x W10.4cm x H12.3cm |
| Autonomy | 1 hours typ. |
| Power consumption | 19W |
| Operating temperature | -20 to +40°C |
(1) Precision, also called reproducibility or repeatability, accounts for the variation in successive measurements taken on the same target. Here precision value is obtained by averaging the precision from 3 flight levels @60, 90 and 120mAGL. At each flight level, the precision is considered as the mean value of absolute elevation differences between 2 flight lines recorded in opposite directions over a nadir-located 40m² hard surface area.
(2) Accuracy is the degree of conformity of a measured position to its actual (true) value. Here accuracy value is obtained by averaging the accuracy from 3 flight levels @ 60, 90 and 120mAGL. At each flight level, the accuracy is considered as the RMSE value of the elevation differences between targets and the point cloud extracted from 2 flight lines recorded in opposite directions. Validation targets are located within a 40m wide corridor centered along the flight line axis.
Available packages
YellowScan Mapper+
- 1x YellowScan Mapper+
- 1x Charger
- 2x Batteries
- 2x USB flash drives
- 1x Rugged peilcase
- Applanix POSPac UAV
- YellowScan CloudStation
- Worldwide support including 1st year unlimited support
- Boresight calibration certificate
- 1-year warranty
- In-person or online training
- Documentation
YellowScan Mapper+ with Camera Module
- 1x YellowScan Mapper+
- 1x Camera module
- 1x Charger
- 2x Batteries
- 2x USB flash drives
- 1x Rugged peilcase
- Applanix POSPac UAV
- YellowScan CloudStation
- Worldwide support including 1st year unlimited support
- Boresight calibration certificate
- 1-year warranty
- In-person or online training
- Documentation
Talk to us about YellowScan Mapper+
If you have a question or would like to know more, fill out the form below and our team will get in touch with you as soon as we can.