NEED SOME HELP?
With its protective cage that doesn't impinge on its aerial ability, the Flyabllity Elios is the first collision tolerant UAV designed for confined, inhospitable, hostile and human access impossible inspection environments. Ensure the safety of your personnel while securing the very best data safe in the knowledge the ELIOS and indeed, the equipment or plant it is monitoring, remains safe from contact or collision
Designed for commercial inspection professionals, the ELIOS allows you dramatically reduce downtime with rapid and safe inspection and instant data feedback. This high-functioning drone wrapped in its protective cage offers piloting ease, maximum manoeuvrability and includes commercial grade payload inclusions. This is the perfect solution for industrial inspections where rapid setup is required and with the in-built collision management, less experienced pilots can take the controls. The ELIOS is capable of takeoff and landing in almost any confined location and can deliver imagery up to 0.2mm/px - even in almost pitch darkness. Most importantly, it keeps your people safe with its ability to access almost any high-risk or confined space.
| Description | Specification |
|---|---|
| Type | Digital, bidirectional, long range Video and data downlink to RC Command uplink to UAV |
| Frequency | 2.4GHz |
| Range | Up to 500m in direct line of sight |
| Description | Specification |
|---|---|
| Type | Lithium polymer battery, 3 cells, 2800mAh, 33.08Wh |
| Charging Time | 1h |
| Battery Change | < 1 minute |
| Description | Specification |
|---|---|
| Type | Quadcopter configuration |
| Dimensions | Fits in <400mm sphere |
| Motors | 4 electric brushless motors |
| Propellors | 4 propellers, 5 inches |
| Take-Off Weight | 700 g including battery, payload & protection |
| Flight Time | Up to 10min |
| Max.Climb Rate | 1.5 m/s (in normal mode) 2.5 m/s (in pro mode) |
| Max.Airspeed | 6.5 m/s (in normal mode) 9 m/s (in pro mode) |
| Wind Resistance | Max 5m/s (in pro mode |
| Flight Sensors | IMU, magnetometer, barometer |
| Materials | Carbon fiber composites, magnesium alloy, aeronautical grade aluminium, high quality thermoplastics |
| Operating Temp | 0 to 50°C |
| Description | Specification |
|---|---|
| Type | Ergonomic Joysticks and Payload controls Integrated video outputs |
| Weight | 810g |
| Operating Temp | 0°C to 40°C |
| Output Port | HDMI, SDI, USB |
| Battery | 6000 mAh 2S |
| Controls | Payload settings and aircraft control |
| Description | Specification |
|---|---|
| Video | FHD (1920 x 1080) at 30fps, good low light performance, recorded on board and streamed to pilot and camera operator |
| Horizontal FOV | 130 degrees |
| Vertical FOV | 75 degrees |
| Total Vertical FOV | 215 degrees (considering payload up/down rotation) |
| Control Modes | Auto with EV correction, full manual mode |
| Description | Specification |
|---|---|
| Type | Uncooled FLIR camera core |
| Video | 160 x 120 pixels at 9fps, recorded on board |
| Horizontal FOV | 56 degree |
| Vertical FOV | 42 degree |
| Description | Specification |
|---|---|
| Type | 5 arrays of high efficiency LEDs for even lighting in front, top and bottom of the robot |
| Control | From remote controller, adaptive light beam controlled by camera pitch |
| Power | 11.4W nominal power for front lighting, 28W total installed max. |