RedEdge-P features a high-resolution panchromatic band for pan-sharpened output resolutions of 2cm at 60m. Its five narrow multispectral bands with scientific-grade filters make it the perfect camera for calculating multiple vegetation indices and composites.
Industry standard for data quality and repeatability
With a high-resolution panchromatic imager, RedEdge-P enables higher-resolution RGB and multispectral outputs – 2cm per pixel resolution when flying at 60m. With sharper imagery, you can spot smaller problems or features sooner and make more reliable management decisions across a variety of use cases.
Five multispectral bands at 1.6 MP each
- Blue (475 nm centre, 32 nm bandwidth)
- Green (560 nm centre, 27 nm bandwidth)
- Red (668 nm centre, 14 nm bandwidth)
- Red edge (717 nm centre, 12 nm bandwidth)
- Near-IR (842 nm centre, 57 nm bandwidth)
Increase data accuracy and repeatability
Each RedEdge-P camera kit comes with a Reflectance Panel for on-the-ground calibration as well as a DLS2 light sensor for irradiance and sun angle measurements. These radiometric calibration tools account for different weather and light conditions, providing more accurate, reliable data that enable time series analysis and comparability of outputs over time.
Powerful AI capabilities
Thanks to the panchromatic band, RedEdge-P enables high-resolution RGB and multispectral imagery for machine learning applications such as plant counting and advanced vegetation research applications.
Compatible with a wide range of drones and processing software
The RedEdge-P SkyPort ensures perfect compatibility with DJI’s M300 RTK drones. The camera also features an open API interface for easy integration with many popular drone and software platforms.
Synchronised capture of high-res RGB and multispectral
Simultaneous capture of up to six bands, enabling multiple high-resolution outputs such as RGB, crop vigor indices and composites (NDVI, NDRE, CIR), and high-resolution panchromatic.
Specifications
Specifications
| Weight | 350 g (12.3 oz.) (RedEdge-P + DLS 2) |
| Dimensions | 8.9 x 7.0 x 6.7 cm (3.5in x 2.8in x 2.6in) |
| External Power | 7.0 V - 25.2 V |
| Power Input | 5.5/7.0/10W (standby, average, peak) |
| Sensor Resolution | 1456 x 1088 (1.6MP per MS band) 2464 x 2056 (5.1MP panchromatic band) |
| Spectral Bands | Blue, green, red, red edge, near-IR (global shutter, narrowband) |
| Wavelength (nm) | Blue (475 nm center, 32 nm bandwidth), green (560 nm center, 27 nm bandwidth), red (668 nm center, 14 nm bandwidth), red edge (717 nm center, 12 nm bandwidth), near-IR (842 nm center, 57 nm bandwidth) |
| RGB Color Output | 5.1 MP (global shutter, aligned with all bands) *with appropriate post-processing |
| Ground Sample Distance (GSD) | 8 cm per pixel (per MS band) at 120m (~400 ft) AGL 4 cm per pixel (panchromatic band) at 120m (~400 ft) AGL |
| Capture Rate | 3 captures per second raw DNG* |
| Interfaces | 3 configurable GPIO: select from trigger input, PPS input, PPS output, and top of frame signals. Host virtual button. USB 2.0 port for WiFi. Serial. 10/100/1000 Ethernet. CF Express for storage |
| Field of View | 50° HFOV x 38° VFOV (MS) 44° HFOV x 38° VFOV (PAN) |
| Storage | CFexpress Card |
NOTE: Specifications may change without notice.
* Only available in manual mode.
Available packages
Multispectral kit
- RedEdge-P sensor
- DLS 2 with embedded GPS
- Calibrated Reflectance Panel (CRP 2)
- USB WiFi dongle
- Lens cover
- Necessary integration cables
- Assorted mounting hardware
- CFexpress card
- CFexpress card reader
- Hard Carrying Case
- Quick StartGuide
Multispectral kit with DJI SkyPort
- RedEdge-P sensor
- DJI Skyport for M300
- DLS 2 with embedded GPS
- Calibrated Reflectance Panel (CRP 2)
- USB WiFi dongle
- Lens cover
- Necessary integration cables
- DJI Skyport for M300
- CFexpress card
- CFexpress card reader
- Hard Carrying Case
- Quick StartGuide
Talk to us about MicaSense RedEdge-P
For inquiries or more information, please fill out the form below, and our team will contact you as soon as we can.